Prestige Multipurpose Soft Closing Waste Chute Matt Black 170mm
- Slow, soft closing lid mechanism
- 316 Marine Stainless Steel gauge 1.5 mm
- Matt Black Finish
- Suitable for counter top - horizontal installations only
Prestige Multipurpose Soft Closing Waste Chute Matt Black 170mm
The prestige counter mounted circular waste chute with soft closing damper lid. Quality mechanism ensures that the close function takes safety into account.
The lid closes slowly and smoothly when released, no sharp edges. The maximum disposal opening area is 22 cm2 suitable for a wide range of waste products.
This quality chute is made from 316 Marine Stainless Steel suitable for domestic, busy kitchens, wet or humid areas.
The waste chute is suitable for counter mounted installation only. Provides discreet access to under-counter waste receptacles (not included)
- Made of 316 stainless steel, resistant to rust, can be used around water
- Slow, soft closing lid mechanism
- No sharp edges
- 22 cm2 of discreet waste disposal
- No unpleasant noise when lid closes
- Flange lip: 12 mm
- Outer Diameter 170 mm
- Inner Diameter 146 mm
- Hole cut: see technical
- 316 Marine Stainless Steel gauge 1.5 mm
- Matt Black Finish
- Ideal for a wide range of waste products
- Suitable for counter top - horizontal installations only
- Certified ISO 14001
| SKU | MPL170B |
|---|---|
| Finish | Matt Black |
| Height (mm) | 36 |
| Outside Diameter (mm) | 170 |
| Inside Diameter (mm) | 146 |
| Waste disposal area (cm2) | 95 |
| Hole cut out diameter (mm) | 148 - 150 |
| Steel gauge (mm) | 1.5 |
| Installation | Counter Tops Only |
| Mechanism Operating Temperatures (C) | 0 - 40C |
| Steel Type | 316 |
| Warranty | 10 Year |
What waste products can you dispose through this chute?
This discreet chute is ideal for items like bottles, cups, and smaller general waste products!
Can you trap fingers in this chute?
This chute lid has no sharp edges and closes very slowly. This quality chute was designed with safety in mind!
Is the lid a tight seal around the rim?
No there is a small gap of 2 mm around the rim as shown on the image!
Can you advise a suitable waste storage bin for this chute?
If the chute is being installed onto a standard cupboard size Height 685 x Width 456 x Depth 495mm see quick code 14176 for 60ltr industrial wase bin available with or without castors
Where is this product manufactured?
Japan!
| SKU | MPL170B |
|---|---|
| GTIN | 5060819135756 |
| Weight | 1.000000 |
| Warranty | 10 years |
| Quick Code | 4129 |
| Delivery | Next Working Day |
