ADA Hand Dryer Stainless Steel Bobrick
- Ideal for disabled wash-rooms hospitals and care homes
- Power: 1.725kW
- Noise: 74dBA
ADA Hand Dryer Stainless Steel Bobrick
Automatic TrimLine warm air hand dryer with satin-finish stainless steel cover and plastic trim. Low-profile design projects only 100 mm from wall surface. Savings of up to 95% when compared with paper towel usage. The use of hand dryers results in a smaller environmental footprint than the use of paper towels. Infra-red sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shut-off approximately 90 seconds after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
- Ideal for disabled wash-rooms hospitals and care homes
- Dual air outlets that provide a swirling circulation of airflow
- Dryer turns off automatically when hands are removed
- Electronic sensor will automatically shut dryer off after 90 seconds
- Power: 1.725kW
- Noise: 74dBA
- cULus Listed, VDE Approved and CE marked
| SKU | B7128 |
|---|---|
| Noise level dB | 72 @1m |
| Motor Power (W) | 1.725 |
| Drying Time (Seconds) | >25 |
| ADA Approved | Yes |
| Operating Voltage | 230V |
| Finish | Brushed Satin Stainless Steel |
| Weight (kg) | 6.35 |
| Height x Width x Depth (mm) | 345 x 350 x 100 |
| EAN/GTIN | 716954009265 |
Where is the dryer manufactured?
USA, Bobrick range is manufactured
How long will the dryer run with hands under the sensor?
The maximum run time is 90 seconds even if an object has been placed under the sensor. The hand dryer will not reset itself until the object has been removed
What is the correct height of installation?
From the floor up the bottom fixing point should be 1219mm, for infants 915 - 1120mm please see downloads for recommended fixing heights
What is the recommended height for installing above countertop or sinks?
This dryer should be installed at least 380mm above any projection or horizontal surface which may interfere with the operation of the automatic sensor
Can this dryer be used behind mirror - cupboard installations?
Yes, however good air circulation should be maintained
| SKU | B7128 |
|---|---|
| GTIN | 716954009265 |
| Weight | 6.350000 |
| Warranty | 10 years |
| Quick Code | 3534 |
| Manufacturer | Bobrick |
| Delivery | 1-2 Working Days |
